Belt Driven Spindles

Meeting machining and rotational needs.

Every Gilman Precision spindle assembly is built from the highest quality materials and components to deliver high performance and long life. All belt driven spindles operate at a fixed speed and incorporate a timing belt for positive power transmission. Standard motors are 230/460 volt 3-phase 60-Hz with other voltage options, gear motors, and inverter rated motors also available.

Please visit our resource section for catalogs and CAD drawings on our complete and customizable line of spindle products.

Belt Drive Options (all up to 133 lb.-ft. of torque) Maximum Thrust Options:

  • 35 lbs. thrust

  • 46 lbs. thrust

  • 67 lbs. thrust

  • 70 lbs. thrust

  • 92 lbs. thrust

  • 138 lbs. thrust

  • 289 lbs. thrust

  • 290 lbs. thrust

  • 655 lbs. thrust

Gilman was approached to solve a problem with a three-spindle cluster module for an outdoor power equipment manufacturer’s engine transfer line. On time delivery and tolerances for spindle centerline location within the work envelope were critical issues for this job. Another important factor was the customer’s desire to use special tooling with the units.

Three Spindle Cluster module 1001

Request A Quote

To request a quote, please contact us using the contact form.

If you have an item that we can repair for you, click the repair request forms below.

Use our product configurator to download a drawing to use in your design.

If you you would like to reach us directly, give us a call at 262-377-2434, or email us at